Marineland
Marineland Rite-Size V Bonded Filter Sleeves are designed to prolong the life of filter media by reducing the accumulation of waste and dirt particles which can cause filters to clog prematurely. Use With all Magnum 350 Canister Filters.
- Traps Small Dirt Particles
- Prevents Premature Clogging
- Lasts Longer to prolong filter media life
For best results, rinse or replace monthly. Easy to install and reusable after rinsing.
Marineland Rite-Size Bonded Filter Pads are specially designed to prolong the life of filter media by reducing the accumulation of waste and dirt particles. The pads porous, open-cell construction promotes water flow without impairing overall filter performance.
- Traps small dirt particles
- Helps prevent clogs
- Lasts longer to prolong filter media life
The 312 sq. in. pad is easy to cut to meet any size specifications. Made of durable interlinked coarse and fine polyester fibers locked together with a tough bonding agent, it catches a wide range of suspended debris to keep your filter clean and your water clear.
Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.
- Replacement O-ring and gasket kit for Marineland C-160 and C-220
- Contains all O-rings and gaskets
- Replace old parts to maintain proper seals and protect filter
Marineland Place-A-Lite Fluorescent Strip Lights are convenient replacement lights for recessed full hoods or Marineland Universal Fit Full Hoods, and may also be used over glass or acrylic canopies. Each Place-A-Light features a textured black finish and includes 1 daylight spectrum fluorescent bulb.
- Replacement strip light for all recessed full hoods and Marineland aquariums
- Instant start, can be put on timer
- Vented for heat dissipation
- Includes 1 daylight spectrum fluorescent bulb
The Place-A-Light casing is made of high impact polystyrene, with a textured surface that won't show fingerprints. A water-resistant rubber switch protects against corrosion. Marineland Place-A-Light was formerly sold as Perfecto Perfect-A-Strip.
Note: Place-A-Lights must be used over glass or acrylic canopies, or aquarium hoods. Do not use over open water.
Specifications:
30" Long
- Dimensions: 30"L x 4.5"W x 2.75"H
- Includes: 24" 17 Watt T8 lamp
- Fits: 30" aquariums and 36" recessed full hoods
This Marineland Impeller Assembly is a genuine factory replacement part for the Emperor 400 Power Filter. Pack includes the complete impeller assembly and cover.
- Replacement impeller for Emperor 400
- Includes impeller assembly and cover
- Genuine Marineland replacement part
Marineland Magnum Floss Sleeves for the Magnum Internal Canister Filter feature a fine mesh weave which traps suspended particles while promoting water flow. This water polishing media prevents premature clogging and helps prolong filter media life.
- Fine mesh traps and holds dirt particles
- Open cell construction promotes water flow
- Prevents premature clogging and prolongs filter media life
Fits Marineland Magnum Polishing Internal Canister Filters. Change monthly for best performance.
The Marineland Magniflow Canister Filter provides powerful filtration to keep aquarium water clean, clear and sparkling. Its efficient 3-stage filtration system removes biological waste, discoloration, impurities, dirt, and debris from freshwater and marine aquariums.
- Powerful, complete 3-stage filtration
- Easy maintenance and fast setup
- For fresh and saltwater aquariums
- 3-year limited warranty
The Magniflow is loaded with user-friendly features to make maintaining your aquarium easier than ever. The canister lid creates a water-tight seal when pressed down, and lifts up for easy removal. Stack n' Flow filter trays allow multiple media layers for total filtration, and are easy to remove for media cleaning or refreshing. A quick-prime button fills the filter chamber with water for fast, self-priming setup, and a valve block lets you immediately shut down water flow and separate the lid from the motor housing for simple, spill-free maintenance.
The Magniflow Canister Filter achieves complete purity by forcing water through several layers of targeted filtration, including:
- Mechanical Filtration: Filter foam pads screen out dirt and debris. Marineland filter foam should be cleaned and rinsed every 3 weeks and replaced every 9 weeks. (Do not clean with soaps or adhesives)
- Carbon Filtration: Inside the carbon bag, Black Diamond Premium Activated Carbon removes odors, discoloration and water impurities. Replace carbon bag monthly since carbon de-activates with use.
- Biological Filtration: Bio-filter balls and rings provide large, multi-faceted surface area for Bio-Spira and beneficial ammonia-reducing bacteria colonies to thrive.
- Water Polishing: Before water is returned to the tank, a polishing filter pad removes any remaining fine debris. Replace every 3 weeks. (Do not clean with soaps or abrasives)
Cartridge Sizing:
Magniflow 160: Rite Size S filter cartridge.
Magniflow 220: Rite Size S filter cartridge.
Magniflow 360: Rite Size T filter cartridge.
Note: Formerly the Marineland C-Series Canister Filter. Magniflow filters are still compatible with Marineland Rite-Size Filter Cartridges. Model 530 is still available as the Marineland C-Series C-530.
The Marineland Magniflow Canister Filter provides powerful filtration to keep aquarium water clean, clear and sparkling. Its efficient 3-stage filtration system removes biological waste, discoloration, impurities, dirt, and debris from freshwater and marine aquariums.
- Powerful, complete 3-stage filtration
- Easy maintenance and fast setup
- For fresh and saltwater aquariums
- 3-year limited warranty
The Magniflow is loaded with user-friendly features to make maintaining your aquarium easier than ever. The canister lid creates a water-tight seal when pressed down, and lifts up for easy removal. Stack n' Flow filter trays allow multiple media layers for total filtration, and are easy to remove for media cleaning or refreshing. A quick-prime button fills the filter chamber with water for fast, self-priming setup, and a valve block lets you immediately shut down water flow and separate the lid from the motor housing for simple, spill-free maintenance.
The Magniflow Canister Filter achieves complete purity by forcing water through several layers of targeted filtration, including:
- Mechanical Filtration: Filter foam pads screen out dirt and debris. Marineland filter foam should be cleaned and rinsed every 3 weeks and replaced every 9 weeks. (Do not clean with soaps or adhesives)
- Carbon Filtration: Inside the carbon bag, Black Diamond Premium Activated Carbon removes odors, discoloration and water impurities. Replace carbon bag monthly since carbon de-activates with use.
- Biological Filtration: Bio-filter balls and rings provide large, multi-faceted surface area for Bio-Spira and beneficial ammonia-reducing bacteria colonies to thrive.
- Water Polishing: Before water is returned to the tank, a polishing filter pad removes any remaining fine debris. Replace every 3 weeks. (Do not clean with soaps or abrasives)
Cartridge Sizing:
Magniflow 160: Rite Size S filter cartridge.
Magniflow 220: Rite Size S filter cartridge.
Magniflow 360: Rite Size T filter cartridge.
Note: Formerly the Marineland C-Series Canister Filter. Magniflow filters are still compatible with Marineland Rite-Size Filter Cartridges. Model 530 is still available as the Marineland C-Series C-530.
All Marineland Penguin BIO-Wheel Power Filters deliver simple, easy, 3-stage aquarium filtration...without the hassle of air pumps, valves, tubing or air stones. Penguin Power Filter aquarium water filtration maintenance is fast and easy.
- Three-stage aquarium filtration
- Rite-Size cartridge changes in seconds with no messy assembly required and Bio-Wheel never needs to be changed
- Safe for fresh and saltwater aquariums
- 3 year manufacturer warranty
Convenient Marineland Penguin Power Filter Rite-Size Filter Cartridges come ready to use with each filter. Marineland Penguin Bio Wheel Power Filters remove waste, discoloration and odors. Each Penguin Power Filter contains new filter cartridges for maximum efficiency. Bio-filtration is provided by the revolutionary BIO-Wheel. Hang on back HOB power filter for easy installation nd maintenance of your fish tank.
Includes: BIO-Wheel Cover, Filter Cover, Impeller Housing, Impeller, Intake Tube, Mid-Level Intake Strainer, Extension Tube, Strainer, BIO-Wheel(s), BIO-Wheel Bearings, Filter Box, and Filter Cartridge(s).
Marineland Penguin Bio Wheel Power Filter Dimensions:
- Penguin 100B: 5" x 5" x 7.5" high
- Penguin 150B: 8" x 5.5" x 6.75" high
- Penguin 200B: 11" x 6" x 7.5" high
- Penguin 350B: 15" x 5.5" x 7.5" high
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
The Marineland Precision Submersible Aquarium Heater offers safe, reliable, highly accurate heating for your fresh or saltwater aquarium. A built-in thermal safety switch accurately regulates the temperature to within 1 degree. The switch also automatically turns the heater off if temperatures exceed internal parameters, and turns it back on when the tank temperature returns to normal. Top and side view temperature scales allow easy viewing from all angles.
- Maintains precise aquarium temperatures to within 1°F accuracy
- Thermal safety switch turns off automatically to prevent heater failure
- Suitable for fresh and saltwater aquariums
The Marineland Precision Heater is extremely user-friendly, with an abundance of features to enhance convenience. The combination of a top-view scale and high visibility sliding scale provides dual confirmation of all temperature adjustments. The "Click Set" control knob clicks for every degree you change the temperature for easy, precise heating. This heater is built to last, with an advanced mesh heating element surrounding the mica core for enhanced heat transfer and long lasting, reliable performance. UL listed.
Included with the Precision Heater is an advanced mounting bracket that securely attaches to glass, providing 3 window positions that let you view the temperature display from multiple angles.
Specifications:
100 Watt: 10.25" Long; Aquariums up to 29 Gallons
150 Watt: 12" Long; Aquariums up to 40 Gallons
200 Watt: 13.5" Long; Aqauriums up to 55 Gallons
250 Watt: 14.5" Long; Aquariums up to 70 Gallons
300 Watt: 15" Long; Aquariums up to 80 Gallons
400 Watt: 18" Long; Aquariums up to 125 Gallons
Directions:
- Attach the included Suction Cups to the Double Suction Mounting Bracket. Slide Bracket over heater.
- Place heater in aquarium by firmly pressing suction ends against wall surface. The Three Position Viewing Window allows you to view the temperature setting from three possible angles - simply turn the heater until it locks into the best viewing position. NOTE: Choose an algae-free location with adequate circulation. This ensures even heat distribution and optimum operation. No part of the heater housing should contact aquarium gravel, rocks, or decorations.
- Wait at least 15 minutes before plugging in your heater. The ON/Off Indicator Light will confirm that the power is on. NOTE: Before plugging in heater, create a "drip loop" to prevent water from reaching receptacle.
- Select the desired temperature. Turn the "Click Set" Temp Select Dial until the point of the red line on the thermometer scale reaches the correct setting. Most tropical fish like 78°-81°F water.
It is recommended to use a tank cover to prevent water temperature variances or heat loss. Both can impair heater performances, creating a hazardous environment for the fish.
Marineland Maxi Jet Pro Power Head Pumps are 3-in-1 pumps that are ideal to meet the needs of internal/external functions in a powerhead, circulation pump or utility pump.
- All parts included to convert from Power Head to Circulation Pump!
- Venturi for quiet, adjustable aeration
- Rotational output to direct water flow
- Adaptable intake to allow use with undergravel filters
- Omni-directional mount to ensure pump fits the tanks current needs
Maxi-Jet 400 - (Powerhead Mode 110 GPH / Circulation Pump Mode 500 GPH)
Maxi-Jet 600 - (Powerhead Mode 160 GPH / Circulation Pump Mode 750 GPH)
Maxi-Jet 900 - (Powerhead Mode 230 GPH / Circulation Pump Mode 1000 GPH)
Maxi-Jet 1200 - (Powerhead Mode 295 GPH / Circulation Pump Mode 1300 GPH)
These submersible maxi jet pumps are perfect for powering undergravel filters, protein skimmers, calcium reactors, or just for creating water movement within your tank.
Marinelands C-Series O-Ring and Gasket kit contains all the replacement seals for the C-Series C-160 and C-220 Aquarium Canister Filters. Sound O-rings and gaskets are essential for maintaining proper seals and protecting your filter.
- Replacement O-ring and gasket kit for Marineland C-160 and C-220
- Contains all O-rings and gaskets
- Replace old parts to maintain proper seals and protect filter
Perfecto Silicone Aquarium Sealant is a multi-use, 100% clear silicone rubber adhesive that stays flexible and creates a waterproof seal. Use it to repair leaky aquariums, build small aquariums and fix broken ornaments.
- 100% clear silicone rubber for repairing and building aquariums and ornaments
- Stays flexible and creates waterproof seal
- Will not crack or shrink
- Harmless to fresh and saltwater fish
Caution: Avoid contact with skin and eyes. Keep out of reach of children.
Marineland C-Series C-160 and C-220 Suction Cups are used to firmly attach the filters intake and outlet tubes to your aquarium walls.
- Replacement suction cups for Marineland C-Series C-160 and C-220 External Canister Filters
- Used to anchor intake and outlet tubes to aquarium walls
- Simple clip-on attachment
Moisten suction cups when applying. Suction cups should be used to attach the intake tube to the inner wall of the aquarium, and the outlet tube to the outer.
The Marineland C-Series C-360 Inlet and Outlet Tube Set features replacement parts for the Marineland 360 C-Series Canister Filters. Inlcudes inlet tube, outlet tube, and inlet tube strainer.
- Replacement inlet and outlet tubes
- Fits Marineland 360 C-Series Canister Filters
- Includes inlet tube, outlet tube and inlet strainer
Marinelands C-Series Replacement Tubing is made of tough, resilient vinyl that provides both strength and flexibility. It is a replacement part for Marineland C-Series (C-160 & C-220) Canister Filters.
- Made of strong vinyl tubing
- 5/8" ID x 6' Long
- Replacement tubing for C-160 & C-220 filters
Marineland Rite-Size S Polishing Filter Pads for C-530 Canister Filters help filter out fine sediment and particulates, providing crystal clear water in your aquarium. Replace Marineland Magniflow and C-Series Polish Pads on a regular basis for optimal filtration.
- Screens out fine particulate dirt and debris
- Helps keep aquarium water clean and clear
- Fits C-530 Canister Filters
Tip: Replace every 1 month for best results.
Marineland Rite-Size S Polishing Filter Pads for C-530 Canister Filters help filter out fine sediment and particulates, providing crystal clear water in your aquarium. Replace Marineland Magniflow and C-Series Polish Pads on a regular basis for optimal filtration.
- Screens out fine particulate dirt and debris
- Helps keep aquarium water clean and clear
- Fits C-530 Canister Filters
Tip: Replace every 1 month for best results.
Marineland Biological Filtration Ceramic Filter Rings for C-Series and Magniflow Canister Filters provide ample porous surface area to support healthy growth of beneficial, ammonia-reducing bacteria and effective biological filtration of your tank.
- Fits all Marineland C-Series and Magniflow Canister Filters
- Porous surface area allows growth of beneficial bacteria
- Supports biological filtration for clean, healthy aquarium water
Ceramic Filter Rings make up Part 3 of your Marineland Canister Filters filtration cycle. This bio media is compatible with Rite-Size S, T, and X filter compartments.
Directions:
- Start up: Remove from packaging. Rinse in room temperature tap water and drain. Place in media container.
- Maintenance: Gently rinse in established aquarium water monthly. Replace only if damaged or if accumulated dirt on surfaces cannot be rinsed away. Never replace more than half of the ceramic rings within a 3 month period.
Marineland Rite-Size Filter Foam for Magniflow Canister Filters and C-Series Canister Filters provides the mechanical filtration within the canister filter. Marineland Canister Filter Foam size varies depending on what canister filter model you have.
- Provides large surface area for trapping particulate debris
- Fits Magniflow and C-Series Canister Filters
- Provides mechanical filtration
Sizing:
Rite-Size S: Fits Magniflow/C-Series 160 and 220
Rite-Size T: Fits Magniflow/C-Series 360
Marineland Rite-Size Filter Foam for Magniflow Canister Filters and C-Series Canister Filters provides the mechanical filtration within the canister filter. Marineland Canister Filter Foam size varies depending on what canister filter model you have.
- Provides large surface area for trapping particulate debris
- Fits Magniflow and C-Series Canister Filters
- Provides mechanical filtration
Sizing:
Rite-Size S: Fits Magniflow/C-Series 160 and 220
Rite-Size T: Fits Magniflow/C-Series 360
Marineland Bio-Filter Balls for all Magniflow Canster Filters and C-Series Canister Filters. The Bio-Filter Balls provide a large, multi-faceted surface area for the growth of beneficial ammonia-neutralizing bacteria responsible for biological filtration.
- Fits all Magniflow Canister Filters and C-Series Canister Filters
- Provides larger, multi-faceted biological filtration area for the growth of beneficial BIO-Spira bacteria
- Allows water to receive full-contact filtration with virtually no bypass
Sizing: 7/8" diameter balls. Compatible with Rite Size S and T filter cartridges.
Marineland Eclipse Filtration Systems filter cartridges are designed for optimal performance and incredible ease of use. Rite-Size Z cartridges feature Marinelands Black Diamond Premium Activated Carbon for excellent mechanical and chemical filtration.
- Replacement filter cartridge for Eclipse System 2 and 3 and Hex 5 and 7
- Pre-assembled and easy to replace
- Provides mechanical and chemical filtration for crystal clear water
A pad of double-thick polyfiber mechanically filters out floating waste and debris before allowing water to pass and be chemically filtered through Marinelands Black Diamond Premium Activated Carbon. Rite-Size cartridges feature a patented ribbed backing to maintain their shape, ensuring even distribution of activated carbon for maximum water-to-carbon contact.
For best results, change cartridge every 2-4 weeks.
Fits: Marineland Eclipse Explorer, System 2 and 3, Hex 5 and 7 and Corner 5.
Dimensions: 4.4"L x 2.8"W